As - Ce Standard Specificities; Overload Test; Functional Test - Haulotte Compact 3368RT Operator's Manual

Engine-powered scissor lifts
G
- Technical characteristics
4 -

AS - CE standard specificities

The following tests must be performed after :
• A major technical intervention.
• An accident due to major component failure on the machine.
• The following tests must be performed by a qualified person in secure conditions.
• The results must be fully recorded.
To avoid the machine tipping over, it must be secured during the test (by a chain or anchorage point).
4.1 -

OVERLOAD TEST

The overload test is performed with 125 % of the nominal load. See paragraph 1.12.3 of the
AS1418.10 standard for test details.
Load table
COMPACT 10DX (COMPACT 2668RT)
COMPACT 12DX (COMPACT 3368RT)
H12SX(L) (HS3388RT(XL))
H15SX(L) (HS4388RT(XL))
H18SX(L) (HS3388RT(XL))
The machine must not show any signs of permanent distortion.
Tests are performed by a qualified person under optimal conditions and results must be fully recorded.
4.2 -

FUNCTIONAL TEST

Functional tests have confirmed the following: :
• The machine has performed all movements without jerking, while carrying the nominal load.
• All security systems are operating correctly.
• Maximum authorized operating speeds are not exceeded.
114 4000014860
Machine Test load
Pound (lb)
1557
1240,1
1929
1377,8
e10 12
Kilogramme (kg)
706,25
562,50
875
625
EN