Engine-powered scissor lifts
E
- Driving
2.2 -
FUNCTIONAL TESTS
2.2.1 - Safety features
Features to be tested :
• Operation of the upper and lower emergency stop buttons.
• Operation of the tilt sensor.
• Visual and audible alarms.
• Platform load management system (Where fitted).
For functional test procedures refer to (
2.2.2 - Ground control box controls (emergency station)
Refer to the corresponding operations to test the controls in the order mentioned
(
Section E 3.2-Operation from ground position).
Compact 10/12DX (Compact 2668/3368RT)
Step
1
2
3
4
5
H12/15/18SX(L) (HS3388/4388/5388RT(XL))
Step
1
2
3
4
62
4000014860
Movements : Platform elevation/lowering( 106 )
Engine start-up selector( 123 )-Move upwards.
'Enable Switch' selector( 123 )-Move downwards.
Beacon light on/off( 24 )
Control box energizing key selector( 72 )
Movements : Platform elevation/lowering( 106 )
Engine start-up selector( 22 )
Beacon light on/off( 24 )
Control box energizing key selector-Dead Man( 72 )
e10 12
Section E 3.1-Test procedure).
Control
Control
EN