Setup; Safety Information - Invacare Softform Premier Active 2S User Manual

Invacare® Softform® Premier Active 2S

4 Setup

4.1 Safety information

WARNING!
Electrical shock hazard!
– Do not remove control unit cover.
– Refer to qualified service personnel.
– Before performing any maintenance to the
control unit, disconnect the power lead from
the wall outlet.
– Do not insert items into any openings of the
control unit. Doing so may cause fire or electric
shock by shorting the internal components.
– The control unit must be kept away from all
heat sources and radiators during operation.
– Connect the equipment to a two or three
prong wall outlet using the five meter power
lead provided with the product.
– Position the device ensuring that access to the
connections on the device are not obscured
and has ease of access.
WARNING!
If this equipment is modified, appropriate
inspection and testing must be conducted to
ensure continued safe use of the equipment.
– Do not modify this equipment without
authorization of the manufacturer.
10
WARNING!
Risk of entrapment!
Patient entrapment with the bed side rails
may cause injury or death. A thorough patient
assessment should be completed and monitored
and the equipment should be used as specified
and maintained to reduce the risk of entrapment.
Variations in bed rail dimensions, and mattress
thickness, size and density could increase the risk
of entrapment.
– Mattress must fit bed frame and side rails to
prevent patient entrapment. Follow the bed
manufacturer's instructions.
– After any adjustments, repair or service and
before use, make sure all attaching hardware
is tightened securely. Rails with dimensions
different from the original equipment supplied
or specified by the bed manufacturer may
not be interchangeable and may result in
entrapment or other injury.
1627426-A