Invacare Softform Premier Active 2S User Manual page 17

1. Wipe all controls, pump casing and hose fittings with a
quaternary disinfectant solution.
2. Using a nylon brush, gently clean all crevices as they
can harbor microorganisms.
3. Air dry all treated surfaces.
Cleaning covers
(Removal of contaminants such as dust and organic matter)
1. Remove all covers for laundering.
2. Launder the covers with the recommended temperature
at
80 °C using a diluted detergent solution (Instructions
on label).
IMPORTANT!
Washing at higher temperatures will cause
shrinkage.
Drying covers
1. Hang mattress covers from a line or bar and drip dry in
a clean indoor environment.
or
Tumble dry on a low heat setting.
IMPORTANT!
– Tumble dry setting must not exceed 40 °C.
– Do not tumble dry for longer than 10 minutes.
– Dry thoroughly before re-fitting to the foam.
Disinfecting covers
(Reducing the number of microorganisms)
1627426-A
Please contact your hygiene specialist in the event of
contamination.
IMPORTANT!
– Ensure that any residual detergent has been
removed prior to disinfection.
Light soilage
1. Wipe down the cover with a 0.1% Chlorine Solution
(1,000 ppm).
2. Rinse the cover with clean water using a single use
nonabrasive cloth.
3. Dry the cover thoroughly.
Maintenance
17