Protek 1006 User Manual page 6

Figure 1-2
Front Panel Description
Description
1. LCD Display.
2. F1～F5: Sets or switch options for the menu.
3. Arrow Keys
4. Hori: Shows Hori menu
5. TRIG: Shows TRIG menu
6. Level: Adjust the trigger level.
7. RUN/STOP: key for running or stopping the operation.
8. AUTO: Be used for auto setting under the oscilloscope operation mode
9. TIME/DIV: Decrease or Increase the time base.
10. POSITION: Adjust the horizontal trigger position.
11. CH2: Shows the CH2 menu.
12. VOLTS: Decrease or Increase the voltage/div.
13. CH1: Shows the CH1 menu.
14. M/R: Shows the Math or REF menu.
15. DMM Buttons: The DMM control buttons.
16. DMM/SCOPE: Switch DMM or Scope function.
17. MENU ON/OFF: Turn on/off the menu
18. SAVE RECALL: Shows SAVE or RECALL menu
19. MEAS: Shows Measurement menu
20. UTILITY: Shows UTILITY menu
21. CURSOR: Shows CURSOR menu