Protek 1006 User Manual page 11

Menu Operation
The following example shows how to use the tool's menus to select a function, as shown
in the following figure.
1. Press the MENU ON/OFF key to display the Function Menu on the bottom of the
screen and the corresponding optional settings on the bottom. Press MENU ON/OFF
again will hide the Function Menu.
2. Choose one key from F1 to F5 and press it to change function setting.
To set up the vertical system
1. Change the vertical setup and notice that each change affects the status bar
differently.
Change the vertical sensitivity with
status bar.
2. Move the signal vertically.
Figure 1-6
Figure 1-7
The Menu
or button and notice the change in the