Specifications - Protek 1006 User Manual

The / button moves the signal vertically. Also notice that the channel symbol on
the left side of the display moves in conjunction with the button.
To set up the horizontal system
1. Change the time base.
The or button changes the time base in a 1-2-5 step sequence, and displays
the value in the status bar.
2. Move signal horizontally.
The or
the trigger point position.
To set up the trigger system
1. Change the trigger Level
The or
the top-right of the screen and a line is displayed showing the location of the
trigger level.
2. Change the trigger setup and notice these changes in the status bar.
Press TRIG button in the key panel.
Choose one key from F1 to F5 and press it to change function setting.
3. Press 50%
The 50% button sets the trigger level to the center of the signal.

Specifications

Vertical
Channels
Bandwidth
Rise Time
Input
Impedance
Input
Sensitivity
Input Coupling AC, DC with Ground Level Indicator
Vertical
Resolution
Memory Depth
Maximum
Input
button moves displayed signal horizontally on waveform window. It set
button change the trigger level. The trigger level value is displayed at
Protek1006: 60MHz
Protek1020: 200MHz
Protek1160: 600MHz
Protek1260: 600MHz
Protek1006: 5.8ns
Protek1020: 1.7ns
Protek1160: 0.58ns
Protek1260: 0.58ns
Resistance: 1M;Capacitance: 15pF
Protek1006: 10mV/div to 5V/div
Protek1020: 2mv/div to 10v/div
Protek1160: 2mv/div to 10v/div
Protek1260: 2mv/div to 10v/div
8bits
32k at single channel; 16k at dual
channel
300V(DC+AC Peak)
2