ATTENTION: To extend the life of your digital scale, do not drop items to be weighed onto the platform or overload the scale beyond its rated capacity. Shock-loading and overloading may damage the load cell and void the warranty. Table of Contents Introduction ..........................
Getting Started After unpacking the scale, a small amount of assembly is required: þ Locate the platter and affix to the scale in the holes provided. Be sure to align the end marked “FRONT” with the front of the scale.
4 lb. INTL Use this key to select the Airmail Letter rate to countries other than Canada and Mexico. Please note that this class of mail currently does not allow packages over 4 lb. PR-5 Instruction Manual I-MAN:PR, Rev.
Calibration Your PR-5 scale is ready to use right out of the box. There is no need to calibrate the scale unless you feel that the scale has become inaccurate. It is a good idea to check the calibration of your scale from time to time with a precision test weight.
7. Take a look at the new Rate Cartridge. On one side of the circuit board, there is an IC and a five pin socket. Install the new Rate Cartridge by lining up the five pins inside the scale with the five open- ings of the socket on the Rate Cartridge.
Page 8
THE SELLER FOR WARRANTY CLAIM OR CLAIMS. No terms, conditions, understanding, or agreements purporting to modify the terms of this war- ranty shall have any legal effect unless made in writing and signed by a corporate officer of the Seller.
Need help?
Do you have a question about the PR-5 and is the answer not in the manual?
Questions and answers