System6 Sub-Zones - Elan A1240 Installation Manual

E L A N H O M E S Y S T E M S

System6 Sub-Zones

ELAN's System6 Integrated Multi-Room Controller has built-in amplification for six
stereo zones as well as six sets of preamp outputs for the addition of sub-zones.
The A1240 is ideally suited to amplify these subzones using rotary or electronic vol-
ume controls if separate volume up/down functionality is desired in the sub-zones.
© ELAN Home Systems 2005 • All rights reserved.
Set S6
ZONE PREAMP
OUTPUT MODE
DIP Switches
To Fixed
A1240
S6 Sub-Zones
• Preamp Output 1 & 2 to Line Inputs 1 & 2
• Preamp Output 3 & 4 to Line Inputs 3 & 4
• Preamp Output 5 & 6 to Line Inputs 5 & 6
• Volume Controls on Each Speaker Output
• Bus Mode DIP Switches in Default
DIRECT Position
Each Zone and Sub-Zone Has Independent
Volume Control
INSTALLATION MANUAL
Page 9