Specifications; Supplied Accessories - Integra RDA-7 Service Manual

RDA-7

Specifications

AMPLIFIER SECTION
Number of channels:
Power:
150 watts per channel min. RMS at 8 ohms, 2 channels
driven from 20 Hz to 20 kHz with no more than 0.1 % total
harmonic distortion.
300 watts per channel min. RMS at 4 ohms, 2 channels
driven at 1 kHz with no more than 0.1 % total harmonic
distortion.
Frequency response @ -3 dB: 3.5 Hz - 250 kHz
Input Impedance:
Input signal for max output power:
Input Sensitivity (Unbalanced):
Input Sensitivity (Balanced):
THD:
Damping Factor:
Power consumption
USA, Canada and some Asian model:
Other models:
Rated Speaker Impedance:
GENERAL
Power Supply:
Dimensions (W × H × D):
Weight:
Specifications and features are subject to change without
notice.
Power supply and voltage vary depending on the area in
which the unit is purchased.

Supplied accessories

Check that the following accessories are supplied with the RDA-7.
Power cord × 1
The power cord may differ
depending on the region.
7
47 kohm each phase
1.2 V
100 mVrms
200 mV
0.03 %(20 Hz to 20 kHz)
40 at 8 ohm
15 A
10 A
4 ohms
AC 120 V, 60 Hz
AC 230 V, 50 Hz
AC 220 V, 50/60 Hz
450 × 195 × 596 mm
17-11/16" × 7-11/16" × 23-7/16"
51.0 kg, 112.4 lbs.
Power cord
2
Instruction Manual
Poly bag
Inner carton