Specifications - Integra ADM-20.4 Instruction Manual

Table of Contents

Advertisement

Specifications

Rated Output Power
(FTC) 75 watts minimum continuous power per channel, 8 ohm loads, 2 channels driven at 1 kHz, with a
maximum total harmonic distortion of 0.08 %
(FTC) 65 watts minimum continuous power per channel, 4 ohm loads, 2 channels driven at 1 kHz, with a
maximum total harmonic distortion of 0.08 %
THD+N (Total Harmonic Distortion+N)
0.08 % (Rated Output Power)
60 (Front, 1 kHz, 8 )
Damping Factor
Input Sensitivity and Impedance (Unbalance)
870 mV/20 k (INPUT)
Rated RCA Output Level and Impedance
0.87 V/270  (OUTPUT)
Frequency Response
10 Hz - 100 kHz/+0 dB, –3 dB (INPUT)
Signal to Noise Ratio
110 dB (INPUT, IHF-A)
4  – 16 
Speaker Impedance
Power Supply
AC 120 V, 60 Hz
Power Consumption
160 W
No-sound Power Consumption
45 W
Stand-by Power Consumption
0.5 W
Dimensions (W × H × D)
435 mm × 139 mm × 317 mm
17-1/8" × 5-1/2" × 12-1/2"
Weight
8.0 kg (17.6 lbs)
Specifications and features are subject to change without notice.
En
11

Advertisement

Table of Contents
loading

Table of Contents