Honeywell HEIPTZ-2201W-IR User Manual page 56

Setting steps:
1. Log in Network High Speed Dome via crossover cable direct connection.(For details, please refer to
"Hardware Installation")
1. Switch to the page network settings, fill in the device IP address requested from network service
provider in to Basic Parameters, such as 218.84.31.168
2. enter correct subnet mask. Such as 255.255.255.0
3. enter correct gateway address. Such as 218.84.31.131
After setup completes, click Save and restart the device, then connect it to public network so that all Internet users
can visit the Network High Speed Dome remotely via entering
Broadband and router sharing Internet access mode (dynamic obtainment of extranet IP address mode) like
ADSL and so on.
If you select router dial-up to connect internet, see below picture for the network topology:
Users can set up DDNS domain name service at the same time. Fill the username and password which were applied
in the DDNS server into the DDNS setting item, implement port mapping from the router. The router determines and
points to the Network High Speed Dome that need to be visited according to different ports, long-distance Internet
user can visit the Network High Speed Dome on the network via domain name directly.
Please refer to below picture for the network settings:
http://218.84.31.168 to IE browser
Honeywell
49