Cable Connection - Honeywell HEIPTZ-2201W-IR User Manual

The explosion-proof junction box and explosion-proof flexible tube for the company
selected parts, shield wire hole and explosion-proof junction box outlet hole thread is G3/4
'' pipe thread explosion-proof junction box mounting flange size:

Cable Connection

If the voltage fluctuation is out of the range of -15% to +10%, the camera should be provided
with a voltage regulator, whose nominal power should be no less than 1.5 times its service
power. A Surge Protective Device (SPD) should be applied to the aerial cable end that
enters the monitoring room or the cable end connected to the product exposed in the open
area, placed at the top of a tower or positioned above the surrounding buildings.
It is recommended that the installation should follow the order of electric supply----voltage
regulator----SPD IN----SPD OUT----transformer----product.
The following fixed crystal head method:
First with the cable tie up two crystal head and the connector：
Make sure no person is standing beneath the installation location in the
process of installation to avoid injuries caused by a falling object.
This product is prohibited wall mounting type， explosion-proof flexible
tube diameter should be not less than 13mm and explosion-proof flexible
pipe thread docking with the holder and the explosion-proof junction box
must be more than 5 thread above
Honeywell
unit：mm
11