Honeywell HEIPTZ-2201W-IR User Manual page 26

Spray Pos: Set PTZ spray preset played in Auto spray mode, take the PTZ rotate to spray position, then
click the Set to add a new position or click Del to cancel.
Spray Mode:Select Auto/ Manual spray mode optional.
Under the condition of the Auto spray mode, user click Auto button , then the device will
start to spray water after 3 seconds, PTZ will rotate to spray position preset during the time. After it
arrive at the preset, the spray and wiper will turn on at the same time, and the spray will turn off after 3
seconds, while the wiper will turn off after it wiper for 3 rounds.After finish all above, they will get back to
their positions.
Under the condition of the Manual spray mode, user click Manual button, the spray will
turn off after 3 seconds, while the wiper will turn off after it wiper for 2 rounds at the same time.
Figure 4-9
Figure 4-10
Honeywell
19