Advertisement
3-3 Current Measurement
1. Connect the red test lead to "mA" terminal and the other (black) test lead to "COM" terminal, or use the "A" and
"COM" terminal in the 10A range.
2. Set function selector rotary switch to " mA
3. Measurement of AC current can be performed by pushing the "Mode" switch.
4. Connect the test leads to the circuit to be measured.
3-4 Resistance Measurement
1. Connect the red test lead to the "°C°FVΩHz" terminal and the other (black) test lead to the "COM" terminal.
2. Set the rotary function selector to "Ω
3. For correct reading, ensure that the device being tested is not live.
4. Connect the test leads across the circuit to be measured. In order to ensure the best accuracy in measure-
ment of low resistance, use the REL key to null the resistance of the shorted test leads. Their resistance will
automatically be subtracted from subsequent measurements.
" or " A
" .
" position to measure the resistance.
26
Advertisement
