Advertisement
WARNING
TO AVOID ELECTRICAL SHOCK, HAZARD OR DAMAGE TO METER, DO NOT ATTEMPT TO
MEASURE VOLTAGE THAT MIGHT EXCEED 1000V ms. DO NOT APPLY MORE THAN 1000V rms
BETWEEN THE COMMON INPUT TERMINAL AND EARTH GROUND.
NOTICE
UNSTABLE DISPLAY MAY OCCUR ESPECIALLY AT 400mV RANGE, EVEN THOUGH THE TEST LEADS
ARE NOT INSERTED INTO THE INPUT TERMINALS . IN THIS CASE, IF AN ERRONEOUS READING IS
SUSPECTED, SHORT THE "°C °F VΩHz" TERMINAL AND THE "COM" TERMINAL, AND MAKE SURE
THE READS ZERO DISPLAY.
25
Advertisement
