Advertisement
TEST EQUIPMENT RISK ASSESSMENT
Users of this equipment and or their employers are reminded that Health and Safety Legislation require them to
carry out valid risk assessments of all electrical work so as to identify potential sources of electrical danger and
risk of electrical injury such as from inadvertent short circuits. Where the assessments show that the risk is
significant then the use of fused test leads constructed in accordance with HSE guidance note GS38 " Electrical
Test Equipment for use by Electricians" should be used.
3-2 Voltage Measurements
1. Connect the red test lead to the "°C°FVΩHz" input terminal and the other (black) test lead to the "COM"
terminal.
2. Set the rotary function to the V
position.
3. Measurement of AC voltage can be performed by pushing the "Mode" switch.
4. Connect the test leads to the circuit to be measured.
24
Advertisement
