Select waveform
AFG1022 Quick Start User Manual
The instrument can provide five standard waveforms (Sine, Square, Ramp,
Pulse and Noise). The instrument can also provide user-defined arbitrary
waveforms. You can create, edit, and save your custom waveforms.
You can also create modulated waveforms using the Mod panel button and then
Mod bezel button menus. The following table shows the combination of
modulation type and the shape of the output waveform. Modulation, sweeping,
and burst modes are only available in Ch1. Continuous mode is available in both
CH1 and CH2.
Sine,
Square,
Ramp
√
AM
√
FM
√
PM
√
FSK
√
Sweep
√
Burst
√
Continuous
Instrument front panel, interface, and rear panel
Noise
Pulse
Arb
√
√
√
√
√
√
√
√
√
17