Operating basics
Generate noise
Generate DC
32
1.
Push the
front-panel Noise
waveform button.
2.
Use the general
purpose knob or
the numeric
keypad to adjust
Ampl, High, Offset
and Low.
NOTE:
You cannot modulate, sweep, or burst noise waveform.
1.
Push the front-panel
Arb button
.
2.
Press Built-in.
3.
Press Others.
4.
Select DC, press
Select to output a DC
waveform.
NOTE:
You cannot modulate, sweep, or burst a DC waveform.
AFG1022 Quick Start User Manual