I Feel Button - Gree GWCN09JANK1A1A Owner's Manual

This wireless remote control is universal, and it could be used for many units, some
buttons of this control which are not available to this unit will not be described below.
Remote control
SWING UP AND DOWN BUTTON
● Press this button to set swing angle,
which circularly changes as below:
OFF
This remote controller is universal.If it
receives threes kinds of following status,
the swing angle will remain original.
If guide louver is stopped when it is
swinging up and down,it will remian its
present position.
indicates guide louver swings back and
forth in the five places,as shown in the
figure.
Operation of wireless remote control
Name and function of wireless remote control
TIMER ON
TIMER ON BUTTON
●
Timer On setting: Signal "ON" will blink
and display, signal
numerical section will become the timer
on setting status. During 5 seconds blink,
by pressing ＋ or － button to adjust the
time value of numerical section, every
press of that button, the value will be
increased or decreased 1 minute. Hold
pressing ＋ or －button, 2 seconds later,
it quickly change, the way of change is:
During the initial 2.5 seconds, ten numbers
change in the one place of minute, then
the one place is constant, ten numbers
change in the tens place of minute at 2.5
seconds speed and carry. During 5s blink,
press the Timer button, the timer setting
succeeds. The Timer On has been set up,
repress the timer button, the Timer On
will be canceled. Before setting the
Timer, please adjust the Clock to the
current actual time.
I FEEL

I FEEL BUTTON

●
Press this button once, to turn on the
I FEEL function, then the figure of "I FEEL"
will be displayed, after every press of
other function button, every 200ms to send
I FEEL once, after this function started,
the remote control will send temperature
to the main unit in every 10 minutes.When
repress this button, this function will be
turned off.
HEALTH BUTTON
●
Press this button,the display will circularly
changes as below:
●
To turn off the unit by remote control,
the air exchange function will be autom-
atically turned off;At unit OFF, this function
could be solely turned on, at unit off press
this button, can set up Air Exchange On
(Display "Air exchange" signal) or OFF
("Air Exchange" disappear).There is no
Healthy function for this model,but if select
"Healthy" status, the main unit will beep,
and keep the original running status.
９
will conceal, the
OFF