Configuration Without Serverstart; Cleaning The Server - Fujitsu PRIMERGY RX100 S5 Operating Manual

Cleaning the server

5.3.5

Configuration without ServerStart

Configuring the onboard SATA controller
Configure the controller as described in section
controller" on page
Configuring the onboard SAS controller with "Integrated Mirroring
Enhanced"
Configure the controller as described in section
controller with "Integrated Mirroring Enhanced"" on page
Installing the operating system
Ê Insert the CD/DVD for the operating system you want to install.
Ê Reboot the server.
Ê Follow the instructions on screen and in the manual for the operating
system.
5.4 Cleaning the server
V
CAUTION!
Switch the server off and disconnect the power plugs from the grounded
shockproof sockets.
Do not clean any interior parts yourself; leave this job to a service
technician.
Do not use any cleaning agents that contain abrasives or may corrode
plastic.
Ensure that no liquid enters the system. Ensure that the ventilation areas
of the server and the monitor are clear.
Clean the keyboard and the mouse with a disinfecting cloth.
Wipe the server and monitor casing with a dry cloth. If particularly dirty, use a
cloth that has been moistened in a mild domestic detergent and then carefully
wrung out.
70
68.
Operating manual
Starting up and operation
"Configuring the onboard SATA
"Configuring the onboard SAS
68.
RX100 S5