Fujitsu PRIMERGY RX100 S5 Operating Manual page 63

Starting up and operation
Indicators on the connection panel (ID indicator)
Figure 14: ID indicator
1 ID indicator (blue)
ID indicators on the front and rear of the server light up when the ID
button is pressed. The two ID indicators are synchronized.
Lights up blue when the system has been selected by pressing the ID
button. To deactivate, press the button again.
The ID indicator can also be activated via ServerView S2 and its status
reported to ServerView S2.
RX100 S5
ID
1
Operating manual
Controls and indicators
63