Table of Contents
Advertisement
2
Installation steps, overview
This chapter contains an overview of the steps necessary to install your server.
Links guide you to sections where you can find more detailed information on the
individual steps:
Ê First of all, it is essential that you familiarize yourself with the safety infor-
mation in chapter
Ê Unpack the system, check the contents of the package for visible transport
damage and check whether the items delivered correspond to the details on
the delivery note (see section
Ê Transport the server to the place where you want to set it up.
Ê Make sure that all necessary manuals (see
page
8) are available; print out the PDF files if required.
Ê Fit the server in the rack (see section
the rack" on page
Ê Wire the server. Follow the instructions in sections
the server" on page 51
cables" on page
Ê Connect the server to the mains (see section
mains" on page
Ê Familiarize yourself with the controls and indicators on the front and rear of
the server (see section
RX100 S5
"Important information" on page
"Unpacking the server" on page
41).
and
"Instructions for connecting/disconnecting
54.
53).
"Controls and indicators" on page
Operating manual
25.
"Documentation overview" on
"Installing/removing the server in/from
"Connecting devices to
"Connecting the server to the
40).
55).
23
Advertisement
Table of Contents
