Head Lamp Bulb Replacement - Mahindra XUV500 2012 Owner's Manual

Head Lamp Bulb Replacement

NOTICE
The head lamp bulb can be replaced without removing
the head lamp assembly from the vehicle. The head
lamp assembly has been removed here for illustration
purpose only.
Projectile Head Lamp
A
A Head lamp High Beam/
Daytime Running Lamp
B Static Bending Lamp
C Parking Lamp
© Copyright Mahindra & Mahindra Ltd. v062012
B C D E
D Head lamp Low
Beam
E Turn Signal Lamp
To replace the head lamp high beam/DRL or low beam bulb;
• Ensure ignition is switched OFF
• Remove rear dust cover from the rear of the head lamp
• Disconnect the electrical connector
• Unhook the bulb retaining clip
• Remove the bulb pulling it straight out.
NOTICE
Do not touch the new bulb with your fingers. Oil
contamination will severely shorten bulb life. If the
bulb comes in contact with any oily surface, clean the
bulb with rubbing alcohol.
!
CAUTION
To avoid burning yourself, do not replace the light
bulbs when they are
pressurized gas inside and are to be handled with
special care. Mishandling it may cause the bulb to
burst or shatter. Hold the bulb with its metal/plastic
holder/base and do not touch the glass part with bare
hands.
MAINTENANCE
hot. Halogen bulbs have
16
297