Copying Problems - Sharp MX-B455W Troubleshooting Manual

Copying Problems

CHECK LIST
Have functions been disabled by the administrator?
Some functions may have been disabled in the setting mode. When user authentication is enabled, the functions that
you can use may be restricted in your user settings. Check with your administrator.
Problem
?
2-SIDED COPYING DOES NOT
TAKE PLACE
ENLARGE/REDUCE DOES NOT
WORK
THE IMAGE IS TOO LIGHT OR TOO
DARK
PART OF THE IMAGE IS CUT OFF
COPIES COME OUT BLANK
I WANT TO COPY MULTIPLE A4
PAGES ONTO ONE A4 SHEET OF
PAPER
Check
Does the paper type setting of the selected tray specify a type of paper
that cannot be used for 2-sided copying?
Are you using a special size or type of paper?
Are you copying using settings that do not allow 2-sided copying?
Are the original, paper, and ratio settings correct?
Is the image too light?
Is the image too dark?
Has an appropriate exposure mode for the original type been selected?
Is the overall copy density too light?
Has an appropriate ratio been selected for the original size and paper
size?
Is the original placed face up or face down correctly?
Use N-Up.
21
Page
22
22
22
22
23
23
23
23
24
24
24