Image Send Problems - Sharp MX-B455W Troubleshooting Manual

Hide thumbs Also See for MX-B455W:
Table of Contents

Advertisement

Image Send Problems

CHECKLIST
Have functions been disabled by the administrator?
Some functions may have been disabled in the setting mode. When user authentication is enabled, the functions that
you can use may be restricted in your user settings. Check with your administrator.
Problem
?
TRANSMISSION DOES NOT TAKE
PLACE
AUTO SELECTION OF THE COLOR
MODE DOES NOT TAKE PLACE
CORRECTLY
THE RECEIVED IMAGE FILE
CANNOT BE OPENED
I DON'T KNOW HOW TO SPECIFY
THE SEND SIZE
TRANSMISSION TAKES A LONG
TIME
A DESTINATION IS PRE-SELECTED
THE SCANNED IMAGE IS CLIPPED
THE QUALITY OF THE SCANNED
IMAGE IS POOR
THE SCANNED IMAGE IS BLANK
THE SCANNED IMAGE IS UPSIDE
DOWN OR ON ITS SIDE
JPEG WAS SELECTED FOR THE
FILE TYPE BUT THE FILE WAS
CREATED AS A TIFF FILE
THE FILE SIZE IS LARGE
AN ADDRESS (A ONE-TOUCH
INDIVIDUAL KEY OR GROUP KEY)
CANNOT BE STORED
AN ADDRESS (A ONE-TOUCH
INDIVIDUAL KEY OR GROUP KEY)
CANNOT BE EDITED OR DELETED
Check
Did you select the correct destination (destination information)? Is the
correct information (e-mail address or FTP server information) stored for
that destination?
Does the image file exceed the e-mail attachment limit set in the setting
mode (administrator)?
Did the image file exceed the file attachment size limit of your mail
server? (When Scan to E-mail is used)
Has the folder on the destination computer been set as a shared folder
so that files can be sent to it? (When using Scan to Network Folder)
Is [IPsec Settings] enabled on the machine? (When using Scan to
Network Folder)
Did you place an original that is folded?
Are you scanning one of the following types of originals?
Does the viewer program used by the recipient support the format of the
received image data?
Does a message appear prompting you to enter your password?
Are you using Easy mode?
Is the resolution setting appropriate at the time of scanning?
Is [Default Address Setting] enabled in the setting mode?
Is the original scan size setting smaller than the actual original size?
Is the original printed matter such as a book or magazine?
When scanning a color or grayscale original, is the color mode set to
[Mono2]?
Are Internet fax addresses included in the transmission?
Is the resolution setting too low?
Is the compression ratio too high?
Is the original placed face up or face down correctly?
Are Internet fax addresses included in the transmission?
Did you select [Mono2] in color mode?
Was the color mode set to [Grayscale] when you scanned a
monochrome original?
Is the resolution setting too high?
Is the compression ratio too low?
Has the maximum number of keys been stored?
Is the key being used in a reserved transmission or a transmission in
progress?
Has your administrator enabled a function that prevents
editing/deleting?
44
Page
45
45
45
45
45
45
46
46
46
46
47
47
47
48
48
48
48
48
48
49
49
49
49
49
50
50
50

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mx-b355w

Table of Contents