Alarm/Aux Relay Switching - Danfoss OPTYMA Operation And Maintenance Manual

OPTYMA Control three-phase
TM

Alarm/AUX RELAY SWITCHING

1. Open the front panel as described on page 8.
2. Bend the hinges and rotate the front panel
downwards 180° to gain access to the electronic
card.
3. Undo the 6 CPU board cover fixing screws:
remove the board from the front panel of the
housing in ABS.
22
(Only follow these instructions if alarm/aux relay is not functioning)
RS8FE102, 080R9278
Operation and Maintenance Guide
© Danfoss A/S (RA Marketing/MWA), Nov. 08