Danfoss OPTYMA Operation And Maintenance Manual page 10

OPTYMA Control three-phase Operation and Maintenance Guide
TM
Installing the unit
(continued)
7.
Squeeze both sides of each hinge together to remove
them from their seats and then completely remove
the front panel.
8.
Using a screwdriver, tap out the tabs in the 4 holes
in the back panel in preparation for fixing it to the
wall.
9.
Using the drilling guide provided, drill 4 fixing holes
in the wall.
© Danfoss A/S (RA Marketing/MWA), Nov. 08
10 RS8FE102, 080R9278