Download Print this page

Alarm Priorities - Danfoss AK-LM 330 User Manual

Adap-kool refrigeration control systems
Hide thumbs Also See for AK-LM 330:

Advertisement

2

Alarm priorities

Measurements
AK error
Settings
Main switch
Stand by mode
Saux 1 error
2,3,4,5,6,7,8
Paux 1 error
2,3,4,5,6,7,8
DI1
2,3,4,5,6,7,8
Th.1 High alarm
Th 1 Low alarm
2,3,4,5,6,7,8
P1 Low alarm
P1 High alarm
2
V1 High alarm
V1 Low alarm
2
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products
already on order provided that such alternations can be made without subsequential changes being necessary in specifications already agreed.
All trademarks in this material are property of the respecitve companies. Danfoss and Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
8
AKS 32 -20 defined with setting = 10
AKS 32 -34 defined with setting = 13
AKS 32 -50 defined with setting = 16
AKS 32R -6 defined with setting = 2
AKS 32R -9 defined with setting = 5
AKS 32R -12 defined with setting = 8
AKS 32R -20 defined with setting = 11
AKS 32R -34 defined with setting = 14
AKS 32R - 50 defined with setting = 17
AKS 2050 -59 defined with setting = 31
AKS 2050 -99 defined with setting = 32
AKS 2050 -159 defined with setting = 33
User-defined defined with setting = 0. + settings via Service Tool.
Do for Paux 2.
When "ON", the controller is in alarm condition.
Main switch:
The alarm priority of the following alarms can be changed:
High priority is defined with setting = 1
Medium priority is defined with setting = 2
Low priority is defined with setting = 3
Overriding the alarms is defined with setting = 0
(Interrupted regulation) See the above introduction
See the above introduction
As for Saux 1
See the above introduction
As for Paux 1
See the above introduction
As for DI1
See the above introduction
See the above introduction
As for Th. 1
See the above introduction
See the above introduction
As for P1
See the above introduction
See the above introduction
As for V1
Menu operation RC8CC202 © Danfoss 09/2012
ON:
Regulation
OFF: Controller stopped
AK-LM 330 Vers. 1.4x

Advertisement

loading