Danfoss OPTYMA Operation And Maintenance Manual page 9

OPTYMA Control three-phase Operation and Maintenance Guide
TM
Installing the unit
(continued)
4.
Close the transparent protection cover.
5.
Open the front of the housing, lift it and slide the two
hinges out as far as they will go.
6.
Bend the hinges and rotate the front panel by 180°
downward to gain access to the inside of the panel;
then disconnect the electronic card connector.
© Danfoss A/S (RA Marketing/MWA), Nov. 08
RS8FE102, 080R9278 9