Functional Comparison Of Ethernet/Ip Functionality On Nj-Series Cpu Units And Other Series - Omron CJ1W-EIP21 Operation Manuals

Appendices
A-1 Functional Comparison of
EtherNet/IP Functionality on NJ-
series CPU Units and Other Series
Tag data link communications service
CIP message communications ser-
vice
Socket service
File transfer (FTP)
Mail send/receive
Web functions
Automatic adjustment of PLC/Control-
ler's internal clock
Error history
Response to PING command
SNMP/SNMP trap
CIDR function for IP addresses
Online connection via EtherNet/IP
using CX-One/Sysmac Studio
Online connection via EtherNet/IP
using Network Configurator
Mounting in a Controller with an NJ-
series CPU Unit
*1 This is equivalent to the event log of the built-in EtherNet/IP port of an NJ-series Controller.
*2 You cannot use the following functions if you connect to the CPU Unit through an EtherNet/IP Unit.
• Going online with a CPU Unit from the Sysmac Studio. (However, you can go online from the Network Con-
figurator.)
• Troubleshooting from an NS-series PT
A-2
EtherNet/IP Unit (built-in port on CJ2
Item
Unit ver-
sion 1.0
OK
OK
---
---
---
---
---
OK
OK
---
---
---
OK
---
CJ-series EtherNet/IP Units Operation Manual for NJ-series CPU Unit (W495)
OK: Supported., ---: Not supported.
Built-in Ether-
CPU Unit)
Net/IP port on
NJ-series CPU
Unit ver- Unit ver-
sion 2.0 sion 2.1
OK OK
OK OK
--- ---
OK OK
--- ---
--- ---
OK OK
OK OK
OK OK
OK OK
OK OK
OK OK
OK OK
--- *2
OK
CJ-series
Ethernet
Unit
Unit
OK ---
OK ---
OK OK
OK OK
--- OK
--- OK
OK OK
*1 OK
OK
OK OK
OK ---
OK ---
--- ---
OK ---
--- ---