Overview - Cisco GS7000 Installation And Operation Manual

Chapter 5 Using the Web Interface

Overview

A web interface is available on the GS7000 DOCSIS Status Monitor transponder. The
default port for HTTP traffic is port 80, but can be configured to use other ports via
the Cheetah httpMgmt MIB. HTTP port configuration is available for the cable
modem interface (via the cable modem IP address) and the CPE interface (via the
Craft connection). Setting the value to zero (0) shuts down access to the HTTP server
for the given interface.
The following table lists the specific OIDs and their default values. The port must be
open to use all of the features described here.
Parameter
httpCMMgmtPort
httpCPEMgmtPort
httpCPU2MgmtPort *
* This parameter is not applicable to this transponder.
To access the interface, type the cable modem IP address of the transponder into
your web browser. The interface includes status data for the cable modem, the HMS
transponder, High Speed Internet Access (HSIA) diagnostics, and the MTA (Media
Terminal Adapter) in VoIP systems.
Note: These pages do not automatically refresh, so you must reload each one
manually to view the most current data.
44
OID
1.3.6.1.4.1.2082.5.5.1.1.1.0
1.3.6.1.4.1.2082.5.5.1.1.2.0
1.3.6.1.4.1.2082.5.5.1.1.3.0
Default
80
80
8008
4037424 Rev A