Cisco GS7000 Installation And Operation Manual page 10

Important Safety Instructions
Only qualified service personnel are allowed to remove chassis covers and access

any of the components inside the chassis.
Equipment Placement
WARNING:
Avoid personal injury and damage to this equipment. An unstable mounting
surface may cause this equipment to fall.
To protect against equipment damage or injury to personnel, comply with the
following:
Install this equipment in a restricted access location (access restricted to service

personnel).
Make sure the mounting surface or rack is stable and can support the size and

weight of this equipment.
Strand (Aerial) Installation
CAUTION:
Be aware of the size and weight of strand-mounted equipment during the
installation operation.
Ensure that the strand can safely support the equipment's weight.
Pedestal, Service Closet, Equipment Room or Underground Vault Installation
WARNING:
Avoid the possibility of personal injury. Ensure proper handling/lifting
techniques are employed when working in confined spaces with heavy
equipment.
Ensure this equipment is securely fastened to the mounting surface or rack

where necessary to protect against damage due to any disturbance and
subsequent fall.
Ensure the mounting surface or rack is appropriately anchored according to

manufacturer's specifications.
Ensure the installation site meets the ventilation requirements given in the

equipment's data sheet to avoid the possibility of equipment overheating.
Ensure the installation site and operating environment is compatible with the

equipment's International Protection (IP) rating specified in the equipment's data
sheet.
viii 4037424 Rev A