Parts List; Technical Support Contact Information; Connectors - Cisco GS7000 Installation And Operation Manual

Chapter 1 Introduction

Parts List

The following table lists the transponder and any other items that are available as an
option. For damage or discrepancies, contact your Cisco representative.
Description
ASSY, MOD, 4X DOCSIS Status Monitor, GS7000.
Includes GS7000 Cable Kit
Spare GS7000 RF Cable Kit (required for cable modem
downstream frequencies above 140 MHz)
Note: This cable kit is not required for optical hub
integrations.
0 dB Pad
10 dB Pad

Technical Support Contact Information

For technical issues, contact your Cisco representative. See Customer Support
Information (on page 79) contact information.

Connectors

The transponder includes:
A node interface connector through which the transponder receives its power

and performs all communications
A label containing the transponder serial number

Downstream RF cable connectors

Six status LEDs

The Craft port, a standard RJ-45 Ethernet connector that provides local access to

the transponder
An optical tamper sensor

A pad socket to attenuate the upstream signal from the transponder so that the

transponder can be configured for different implementations
6
Part Number Qty
4036793 1
4038028 1
574475 1
574485 1
4037424 Rev A