Acquiring The Transponders By The Snmp Manager - Cisco GS7000 Installation And Operation Manual

Docsis status monitor transponder

Hide thumbs Also See for GS7000:

Table of Contents

Acquiring the Transponders by the SNMP Manager

The transponder must first complete its initialization and registration from the Cable

Modem configuration file. The transponder will then send a warm start trap to the

SNMP Manager as specified in the cable modem configuration file. This trap

provides the SNMP Manager with the MAC and IP addresses of the transponder

and should, depending on the configuration of the manager software, initiate

monitoring the fiber node.

4037424 Rev A

Table of Contents