Cisco GS7000 Installation And Operation Manual page 36
Docsis status monitor transponder
Hide thumbs
Also See for GS7000:
- Installation and operation manual (254 pages) ,
- Installation and configuration manual (162 pages) ,
- Maintenance manual (15 pages)
Table of Contents
Advertisement
Chapter 2 Installation
6
Push the transponder down firmly onto the OIB until the transponder seats into
position. Use the screws provided with the transponder to secure the
transponder to the board. The screw locations are shown in the following
illustration. Tighten screws to 25-30 in-lbs (2.8-3.4 Nm).
20
4037424 Rev A
Advertisement
Table of Contents
