Overview - Cisco GS7000 Installation And Operation Manual

Docsis status monitor transponder

Hide thumbs Also See for GS7000:

Table of Contents

Chapter 4 Using the Craft Port

Overview

The Craft port on the transponder is typically used as a local connection point,

allowing the user to connect directly to the unit. However, the Craft port is a fully

functional, standard Ethernet port, so it can also provide all of the functionality of

any standard Ethernet connection.

When using a local, direct connection to the transponder, the technician has the

option of communicating with the transponder either via a web browser interface or

using a Telnet console session. Both connection processes are discussed in the

sections that follow. See Using the Web Interface (on page 43) for more detailed

information on using the transponder web interface.

Important: Console access is intended for use by factory trained technicians. It is not

recommended for use by technicians in the field.

4037424 Rev A

Table of Contents