Extech Instruments CG206 User Manual page 7

c. Auto Power OFF
Select ENABLE or DISABLE using the arrow buttons. When enabled, the meter
automatically switches OFF after 3 minutes of inactivity. When disabled, the meter will
only switch OFF with a power button press or when the battery power is weak.
Press the LEFT button (SELECT) button to confirm and to return to the SET menu
(otherwise press the right button (
d. Contrast
Use the UP and DOWN arrows to adjust the display contrast up or down.
Press the LEFT button (OK) button to confirm and to return to the SET menu
(otherwise press the right button (
e. Info
The model number and firmware version level are displayed.
Press the right button (
MEASURE VIEW
The Measure View menu allows for scrolling through the readings in all of the groups.
Readings can be viewed or deleted in this mode.
1. Press the LEFT button (SEL) to access the main menu.
2. Use the DOWN ARROW button to scroll down to MEASURE VIEW.
3. Press LEFT (SELECT) to open the MEASURE VIEW parameter.
4. Use the UP/DOWN ARROW buttons to scroll through the groups of stored readings.
5. When a group is highlighted that contains stored readings, use the LEFT (SELECT) button to
open the readings list. Now use the UP/DOWN arrows to view the readings. Press the LEFT
button (Delete Group) to delete all readings in this Group or press the RIGHT button (
return to the main Group list.
6. Highlight 'Delete All' and press the LEFT button (SELECT) to delete all of the readings in all
groups. Otherwise press the RIGHT button (
)
to abort the edit and return to the SET menu).
)
to abort the edit and return to the SET menu).
)
to exit to the SET menu.
)
to return to the previous menu.
7
)
CG206‐en‐GB_v1.0 6/16
to