Extech Instruments CG206 User Manual page 10

Record Readings in Memory Groups
The CG206 offers 30 memory storage groups, Group '0' through '30'.
Group '0' does not allow data to be stored; it is simply a group that can be selected if readings are
to be taken without being stored.
From the Normal measurement mode, Use the UP/DOWN arrow keys to scroll to a particular
group. When a reading is taken it is automatically stored in the selected group.
Each Group can store up to 50 readings (for a total of 1500 for the 30 groups).
To delete all groups, or an individual group, use the MEASURE VIEW mode as explained in the
programming menu section of this User Guide.
In GROUP mode, if the storage capacity is exceeded. The meter will display (50) in the upper right
corner and will beep twice.
SOFTWARE
This meter is capable of storing data and can download that data to a PC through the supplied
Windows© compatible software and micro‐USB cable. Refer to the Software Help guide supplied
with the software on how to install and operate the software.
Check the software download page of the website www.extech.com for the latest version of the
PC software and its operating system compatibility.
10
CG206‐en‐GB_v1.0 6/16