Extech Instruments C015 User Manual

Extech Instruments C015 User Manual

Carbon monoxide meter

Advertisement

E XT ,,§ $; J:f .
Carbon Monoxide Meter
Model C015
Visit us at www.TestEquipmentDepot.com
User Manual
99 Washington Street
Melrose, MA 02176
Phone 781-665-1400
Toll Free 1-800-517-8431

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the C015 and is the answer not in the manual?

Questions and answers

Summary of Contents for Extech Instruments C015

  • Page 1 E XT ,,§ $; J:f . User Manual Carbon Monoxide Meter Model C015 99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.TestEquipmentDepot.com...
  • Page 2: Safety Information

    Introduction Thank you for selecting the Extech CO15 Carbon Monoxide Meter. The CO15 is a digital, pen style meter, that measures and displays carbon monoxide (CO) concentrations between 0 and 999 parts per million (ppm). The CO15 can be used for ambient air safety checks of residential areas, appliances, HVAC service on furnaces and hot water heaters, home inspections, and industrial environments where the accumulation of CO...
  • Page 3  Electromagnetic (EMI) interference my cause erratic meter readings; do not place meter near areas of high EMI when taking CO measurements.  Recovery time is required after the meter has been exposed to high levels of CO (the longer the exposure, the longer the recovery time).
  • Page 4: Meter Description

    Meter Description COSensor Backlight/Units button Power/Alarm limit button Note: Battery compartment located on back of meter. LCD Display 1. Primary Display 2. MAX reading mode 3. Secondary Display 4. Unit of measure Button Descriptions Turn the meter on and off (short press); Select alarm setpoint value (long press from a powered OFF state;...
  • Page 5: Operation

    Operation Power the meter IMPORTANT: Power the meter in a room temperature environment and in an area free of CO; otherwise the meter will read incorrectly when subsequently measuring Press the button to power on the meter. The LCD will switch ON and display the programmed CO alarm limit in the primary display and the ambient air temperature in the secondary display (as shown in the LCD description...
  • Page 7: Specifications

    Specifications Measurement range 0-999 ppm Resolution 1 ppm Accuracy 0 ~ 100 ppm: ± 20% 100 ~ 500 ppm: ± 15% Accuracy stated for ambient conditions: 20 C ±5 C (68 F ±9 and 50% RH ±20%RH Sensor Type Electrochemical Power supply (3) 1.5V ‘AAA’...

Table of Contents