Installing Battery Well Spacers (Optional) - ZOLL SurePower Operator's Manual

Installing Battery Well Spacers (Optional)

The SurePower Charger Station is designed to accept molded plastic battery well spacers that you
can install in the back of the charging bays (
will be charging only SurePower Battery Packs. The well spacers improve the fit of SurePower
Battery Packs in the charger bays and prevent older ZOLL lead acid batteries from being used
with the charger.
Figure 2-3 Battery Well Spacer
To install the battery well spacer, use the screws provided and the pre-drilled holes in the back
of the battery bay to secure the bay spacers as shown in the following illustration.
Figure 2-4 Installing the Battery Well Spacer
9650-0535-01 Rev. C
REF
( 8050-0032-01)
SurePower Charger Station Operator's Guide
Installing Battery Well Spacers (Optional)
REF 8050-0032-01). Use these well spacers if you
.
2-3