Creating Greater Excitement With The Retrigger Function; Switching To Another Groove With Musical Climax - Yamaha PSR-E463 Owner's Manual

Table of Contents

Advertisement

5
Now try rotating knob A back and forth
slowly with the rhythm. Notice that you
can get a completely different sound and
feel, even with the same rhythmic
phrase.
6
As in the steps above, press the [KNOB
ASSIGN] button and try using the sec-
ond and third items. REVERB/CHORUS
controls the acoustic ambience, or pro-
duces a rich and warm layered effect.
DSP controls one of 10 different effects,
such as rotary speaker and distortion.
For details, refer to page 57.
NOTE
• When switching the [LIVE CONTROL] row, make sure to
set the target to BACKING. The target is conveniently
saved for each function.
• When using c, press the [DSP] button to turn on the DSP
function. The DSP icon appears on the display.
• Only selecting a function combination will not affect the
sound even if the knob arrow is not at the center position.
The selected function only works when the knob is
moved.
Creating Greater Excitement
with the Retrigger Function
Press the section [C] button to switch to Section C
and listen to the rhythm. The beats become increas-
ingly more rapid after the Measure 005, and this
effect creates intensity and excitement. You can raise
the emotional level of your own performance with a
similar "rapid-fire" effect with the Retrigger function
and Live Control Knobs.
1
While checking the display, press the
[KNOB ASSIGN] button several times to
select b.
SECT C
2
Rotate knob B about 90° to the left.
008
3
While checking the Beat marks "
and Measure number in the display,
press and hold the section [C] button at
the point just before the Measure count
reaches 005.
4
While holding down the section [C] but-
ton, rotate knob B according to the fol-
lowing illustration. The beats become
more rapid according to the knob posi-
tion.
5
Release the section [C] button at the
dynamic peak to return to normal play-
back of the Groove .
Switching to Another Groove
with Musical Climax
1
While checking the Beat marks "
on the display, press the [MUSICAL CLI-
MAX] button at an appropriate timing,
just before when the Measure changes
from 008 back to 001. The Groove starts
building to a climax with an 8-measure
lead-in (negative count).
M.Climax
2
Just as the lead-in approaches 0, use the
number buttons to enter a different
Groove number. The timing may be a lit-
tle difficult, but with practice you can
seamlessly switch to another Groove
after the Musical Climax—just like a pro
DJ!
NOTE
• By memorizing the next Groove to a Registration Memory
setting, you can easily switch Grooves with just a single
button press (page 44).
PSR-E463/PSR-EW410 Owner's Manual
Playing Like a DJ!
"
"
−08
37

Advertisement

Table of Contents
loading

This manual is also suitable for:

Psr-ew410

Table of Contents