Exiting From A File Control Display; Message List - Yamaha PSR-E463 Owner's Manual

Exiting from a File Control
Display
To exit from the File Control display, press the
[FUNCTION], [VOICE], [STYLE], [SONG] or
[GROOVE CREATOR] button.
You can also exit from the File Control function mode
as follows:
1
Use the CATEGORY [<<] and [>>] but-
tons to call up the "Exit?" message.
2
Press the [0/EXECUTE] button to exit
from the File Control display.
Exit?
USB Flash Drive Operations

Message List

Message
Indicates that the file control function is
Can'tUse currently unavailable since the USB flash
drive is being accessed.
Indicates completion of the corresponding
Complet. operation, such as data saving or trans-
mission.
Displayed when the user song contains
Data Err
invalid data.
Displayed when saving data cannot be
executed since the memory has become
Disk Ful
full. Delete any unnecessary data or use
another USB flash drive.
Displayed when a file error or operational
Error
error occurs.
Displayed when saving of data cannot be
executed because the total number of files
File Ful exceeds the capacity. Delete any unnec-
essary data or use another USB flash
drive.
no data There is no data in the memory.
no file There is no file in the memory.
Communication with the USB flash drive
has been shut down because of overcur-
Ovr rent to the USB flash drive. Disconnect the
(Flashes) USB flash drive from the [USB TO
DEVICE] terminal, then turn on the power
of the instrument.
Displayed when trying to save or delete
data on a protected USB flash drive, or
Protect
formatting a protected USB flash drive.
Set protect to off and try again.
Displayed when connecting an unformat-
UnFormat
ted USB flash drive.
USB flash drive save, delete, and format
operations cannot be performed when the
UseAdpt
instrument is being powered from battery.
Use an AC adaptor.
PSR-E463/PSR-EW410 Owner's Manual
Comment
77