Display Items - Yamaha PSR-E463 Owner's Manual

Display Items

The display shows all the current settings of the Song, Style, Groove, Voice and other related functions.
Power source status
Indicates the source from
which this instrument obtains
power: AC adaptor or batter-
ies (page 15).
USB connection status
Appears when a USB flash
drive is connected to this
instrument (page 71).
On/off status
This area indicates the on/off status of
each function. Each indication is
shown when the corresponding func-
tion is turned on.
page 21
page 20
page 22
page 22
page 52
page 24
page 53
page 46
page 26
page 60
Notation
Normally this indicates the
notes you play.
NOTE
• Any notes occurring below
or above the staff are indi-
cated by "8va. "
• For a few specific chords,
not all notes may be
shown, due to space limita-
tions in the display.
GrandPno
001
001
Indicates the current beat of playback (page 28).
Indicates the parameters and target currently
assigned to the knobs (page 25).
Indicates the Function number when the [FUNC-
TION] button is pressed, or the current Measure
number during playback of a Song, Style or Groove.
Indicates the chord which is being played in the Auto
Accompaniment range (page 26) or specified via
Song playback.
Indicates the on/off status of the current
Song, Style or Groove (pages 29, 38,
60).
Basic Operation and Display Items
The illustration is from the PSR-E463.
Indicates that Audio Mode is
enabled, allowing you to play
back or record audio files from/to
a USB flash drive (pages 41, 42).
Indicates that the Quick Sam-
pling mode is enabled, allowing
you to sample sounds from an
external audio device (page 31).
Sample Zone status
Indicates the assign status of the Sample
feature. When a Sample type is set to
Loop, ( ) is displayed.
Beat
Knob assignment
FUNCTION and MEASURE
Chord
Track status
PSR-E463/PSR-EW410 Owner's Manual
Mode
001
19