Table of Contents
Advertisement
Basic Operation and Display Items
Quick Guide
Basic Operation
This instrument features four basic functions: Voice, Style, Song and Groove Creator. To use this instrument,
select a basic function first, and then make various settings.
1
Select a basic function.
Rotate the dial clockwise to
increase the value of the
selected item, or counter-
clockwise to decrease it's
value.
* In most procedures described throughout this manual,
the dial is used for selecting items or changing values.
Note however, that in most cases in which the dial can
be used to change values, the [+/YES] and [-/NO] but-
tons can also be used.
CATEGORY [<<], [>>] buttons
When selecting a Voice, Style,
Groove, Song, etc., you can use
these buttons to jump to the first
item in the next or previous cate-
gory.
These buttons can also be used
to select function items sequen-
tially after pressing the [FUNC-
TION] button.
The "Press & Hold" Symbol
Buttons having this indication can be used to call up an alternate function when the relevant
button is pressed and held. Hold down this button until the function calls up.
18
PSR-E463/PSR-EW410 Owner's Manual
2
Select an item or value.
Dial
Decrease
Increase
Jumps to
Jumps to
the first
the first
item in the
item in the
previous
next cate-
category.
gory.
Depending on the basic function selected in step
the different functions as printed on the panel. Song functions are
printed above the buttons, Groove Creator functions are printed fur-
ther above, and Style functions are printed below.
3
Start a function or play the keyboard.
Number buttons [0]–[9]
Use these buttons to directly
enter the desired Style/
Voice number etc, or a
parameter value.
Example:
Selecting Voice 003,
Bright Piano.
[+/YES], [-/NO] buttons
Press the [+/YES] button briefly to
increase the value by 1, or press
the [-/NO] button briefly to
decrease the value by 1. Press
and hold either button to continu-
ously increase or decrease the
value in the corresponding direc-
tion.
Pressing both buttons simultane-
ously lets you reset a parameter
to the default value.
Press number
buttons [0], [0], [3].
Press briefly
Press briefly
to decrease.
to increase.
1
, you can use
Advertisement
Table of Contents
