Loading User Data From A Usb Flash Drive - Yamaha PSR-E463 Owner's Manual

USB Flash Drive Operations
5
Press the [0/EXECUTE] button again.
A confirmation message will appear. To cancel
the operation, press the [-/NO] button.
Overwriting existing files
If a file that already contains data is selected, an
overwrite confirmation message will appear.
6
Press the [0/EXECUTE] button again, or
the [+/YES] button to execute the Save
operation.
After a while, a message indicating completion of
the operation appears, and a User Song will be
saved (in SMF format 0) to a "USER FILES"
folder, automatically created on the USB flash
drive.
NOTICE
• The Save operation cannot be cancelled during execu-
tion. Never turn off the power or disconnect the USB
flash drive during the operation. Doing so may result
in data loss.
NOTE
• The amount of time required for this operation may vary
depending on the condition of the USB flash drive.
• If a Groove has been recorded to the User Song, the
Save operation cannot be executed by pressing the [0/
EXECUTE] button or the [+/YES] button, and "Can'tUse"
appears on the display.
7
Press the [FUNCTION] button to exit
from the File Control display.
74
PSR-E463/PSR-EW410 Owner's Manual
Loading User Data from a USB
Flash Drive
A User data (page 72) saved as a User file (.usr) to
the USB flash drive can be loaded to this instrument.
NOTICE
• Loading a User file will overwrite and erase the existing
data, including all 10 User Songs, Style data loaded to the
Style numbers 236–245, and all the Registration Memory
settings. Save important data you want to keep to a sepa-
rate USB flash drive before loading a User file.
IMPORTANT
• Note that User files should be saved in the "USER FILES"
folder on the USB flash drive. Files saved outside this
folder cannot be recognized.
NOTE
• About loading Sample, refer to page 35.
1
Hold the [FUNCTION] button for longer
than a second to call up the File Control
display.
2
Use the CATEGORY [<<] and [>>] but-
tons to call up "Load USR."
3
Press the [0/EXECUTE] button.
User file names on the USB flash drive appear on
the display as "USER***" (***: number). As
desired, rotate the dial to select a different User
file.
4
Press the [0/EXECUTE] button again.
A confirmation message will appear. To cancel
the operation, press the [-/NO] button.
5
Press the [0/EXECUTE] button again, or
the [+/YES] button to execute the Load
operation.
After a while, a message indicating completion of
the operation appears.
NOTICE
• The Load operation cannot be cancelled during execu-
tion. Never turn off the power or disconnect the USB
flash drive during the operation. Doing so may result
in data loss.
Load USR
USER001