Basic Operations; Top Screen Configuration; Creating A Live Set Sound; Saving The Live Set Sound - Yamaha CK88 Owner's Manual

Basic operations

Top screen configuration

This section explains the Top screen which appears
when the CK is turned on.
4 5
1
!
3
@ #
1 Live Set Sound number
Shows the currently selected Live Set Sound number.
With the initial setting, number 1-1 will be called up at
startup.
To use a different Live Set Sound number for startup,
change the setting from the [MENU] button  General
 System  Power on Sound (page 36).
2 Voice
Shows the Voice name when the Part is on.
With some Organ voices, the Voice name and the
Drawbar settings will be shown.
3 Split and Layer
Shows the current split and layer status of each Part.
The split point is the lowest key on the right keyboard
range.
Other icons
Panel lock is on.
The setting can be changed by
4
simultaneously pressing both the
[ENTER] and [MENU] buttons.
Sound Transpose for the Live Set
Sound is set to a value other than 0
5
(−12 to +12).
Live Set EQ is set to on.
6
Audio Trigger is set to ON.
7
Master Keyboard is set to ON.
8
Connected via Bluetooth.
9
Battery level (shown only during
)
battery operation).
Touch Sensitivity for the Part has
!
been changed.
(For Part A)
24
CK88 CK61 Owner's Manual
6 7 8 9 )
2
External Keyboard for the Part is set
to ExtOnly
@
Play the external keyboard to sound
the internal tone generator.
Note Shift for the Part is set to a
value other than 0 (±24)
When the note value is −24, −12,
#
+12, and +24, it is shown as OCT−2,
OCT−1, OCT+1, and OCT+2

Creating a Live Set Sound

Use the Live Set Sound for sound-making.
Select a voice and combine voices
Adjust the organ sound
Select a Live Set Sound
The basic sound-making procedures are as shown
below.
1.
Select a Live Set Sound.
2.
Select a Voice for each Part.
3.
Set a combination of these Voices.
4.
Creating an Organ voice.
5.
Modify sounds using EG, Filter, Effects,
MONO, and Unison settings.
6.
Save the Live Set Sound.

Saving the Live Set Sound

Edited Live Set Sounds are saved to the internal
memory of the CK by pressing the [STORE] button.
1.
Press the [STORE] button.
A screen for selecting the Live Set Sound to be
stored appears.
Apply sound effects