Tuning Each Note To Create An Original Scale - Yamaha PSR-E463 Owner's Manual

Scale Tuning
Tuning Each Note to Create an
Original Scale
You can tune the individual notes in cents (a "cent" is
1/100th of a semitone) to create your own original
scale.
1
Press the [FUNCTION] button.
2
Use the CATEGORY [<<] and [>>] but-
tons to call up "TuneNote" (Function
048).
After a few seconds, the current note appears.
3
Rotate the dial to select the note to be
tuned from C, C#, D, Eb, E, F, F#, G, Ab, A,
Bb, B.
4
Press the CATEGORY [>>] button to call
up "Tune" (Function 049).
After a few seconds, the tuning value of the note
selected in step 3 appears.
54
PSR-E463/PSR-EW410 Owner's Manual
TuneNote
048
C
048
01
Current tuning note
Tune
049
Tune C
049
00
Tuning value
5
Rotate the dial to tune the note over a
range of -64 to +63.
The setting can be reset to the initial default value
by pressing the [+/YES] and [-/NO] buttons simul-
taneously.
6
Repeat steps 2–5 as desired.
7
Memorize the settings here to a Regis-
tration Memory as desired (page 44).
NOTE
• When pressing the [+/YES] and [-/NO] buttons simultane-
ously after recalling an original scale memorized to Reg-
istration Memory, the scale will return to the original scale
registered to Registration Memory, not to the default tune
value.
• When calling up "Scale" (Function 046) after using indi-
vidual note scale tuning, "(Edited)" will be shown in the
display. However, the edited scale settings will be erased
by calling up another scale. For this reason, the edited
settings should be memorized to Registration Memory.