Mitsubishi Electric FR-A7NC E kit-SC Instruction Manual page 34

Pr. 338 Communication operation
Operation
command source
Location
Pr. 339 Communication speed
Selection
command source
Reverse rotation
61 STR
command
62 RES Inverter reset
PU/NET operation
65 X65
switchover
External/NET operation
66 X66
switchover
Command source
67 X67
switchover
[Explanation of table]
External : Command is valid only from control terminal.
NET : Command only from communication is valid.
Combined : Command from both control terminal and communication is valid.
: Command from either of control terminal and communication is invalid.
—
REMARKS
• The command source of communication is as set in Pr. 550 and Pr. 551.
• The Pr. 338 and Pr. 339 settings can be changed while the inverter is running when Pr. 77 = "2". Note that the setting
change is applied after the inverter has stopped. Until the inverter has stopped, communication operation command
source and communication speed command source before the setting change are valid.
0: NET
0: 1: 2:
NET External External
NET
External
External
External
External
INVERTER SETTING
1: External
0: 1: 2:
NET External External
External
Remarks
4
27