INSTALLATION
(6) Remove the PU cover provided on the front cover for plug-in option and install the other PU cover,
which was removed in (2).
(7) Mount the already wired terminal block to the plug-in option. (Refer to Chapter 3 for wiring.)
(8) Install the front cover for plug-in option to the inverter.
Front cover
for plug-in option
(8)
(6) Replace
8
(3) Hexagon
spacer
(4)
(5) Mounting screws
(short)
(7)
(3) Plug-in option connector
of inverter
(3) Junction connector
(3) Spacer for plug-in option mounting
(5) Mounting screw (long)
(7) CC-Link communication cable